Quote for AP05-C-705-254 NSN part manufactured by Ace Electronics Associates Inc with NSN 5905-00-899-1891

Part Number:   AP05-C-705-254
Alternate P/N:  AP05C705254
NSN:  5905008991891
NIIN:  008991891
CAGE Code:  02297
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37408
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number AP05-C-705-254, which is manufactured by Ace Electronics Associates Inc under the CAGE Code 02297 and listed with the item name “Resistor Variable Wire Wound Pre.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AP05-C-705-254

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number AP05-C-705-254 is organized under NSN 5905-00-899-1891, meaning that its NIIN is 008991891. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number AP05-C-705-254 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number AP05-C-705-254 with NSN 5905-00-899-1891, 5905008991891

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-899-1891

Item Description:

Resistorvariablewire Woundpre

59050089918910N
CIICHCCESDPMICCriticalityENAC
U S
Part NumberISCRNVCRNCCHCCMSDSSADC
64a9b302223

Characteristics Data of NSN 5905-00-899-1891, 5905008991891

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1 358 INCHES NOMINAL
ABPMBODY DIAMETER0 500 INCHES NOMINAL
ABWVSHAFT DIAMETER0 1245 INCHES MINIMUM AND 0 125 INCHES MAXIMUM
ABXFSHAFT LENGTH0 625 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0 375 INCHES NOMINAL
ADAQBODY LENGTH0 571 INCHES MAXIMUM
ADAVOVERALL DIAMETER0 500 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBEARING
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION325 0 NOMINAL
AEFNNONTURN DEVICE LOCATIONAT 12 OCLOCK
AEFPNONTURN DEVICE RADIUS0 157 INCHES NOMINAL
AJYNSCREW THREAD DIAMETER0 250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32 0
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHERMETICALLY SEALED
CQCCELECTRICAL RESISTANCE PER SECTION250 0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360 0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0 30 TO 0 30 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125 0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2 0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-2 0 TO 2 0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20 0 TO 20 0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER65 0 SINGLE SECTION
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINALS SILVER
PRMTPRECIOUS MATERIALSILVER
TTQYTERMINAL TYPE AND QUANTITY2 SOLDER STUD AND 1 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC S - Item contains silver.

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top