Quote for APGN66-1-62-303 NSN part manufactured by Ai Tek Instruments Llc with NSN 5925-01-221-8107

Part Number:   APGN66-1-62-303
Alternate P/N:  APGN66162303
Manufacturer:  Ai Tek Instruments Llc
NSN:  5925012218107
NIIN:  012218107
CAGE Code:  1XP56
Item Name:  Circuit Breaker
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  00136
Country:  USA
NCB Code:  01

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number APGN66-1-62-303, which is manufactured by Ai Tek Instruments Llc under the CAGE Code 1XP56 and listed with the item name “Circuit Breaker.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for APGN66-1-62-303

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number APGN66-1-62-303 is organized under NSN 5925-01-221-8107, meaning that its NIIN is 012218107. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5925 Circuit Breakers. Using these details, you can both verify that part number APGN66-1-62-303 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number APGN66-1-62-303 with NSN 5925-01-221-8107, 5925012218107

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5925-01-221-8107

Item Description:

Circuit Breaker

59250122181070P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
Apgn-66-1-62-303593

Characteristics Data of NSN 5925-01-221-8107, 5925012218107

MRCCriteriaCharacteristic
AAJETHREAD PITCH DIAMETERS0 4752 TO 0 4787 INCHES
AAQLBODY STYLEMULTIPOLE-SINGLE ACTUATOR TYPE
ABXDBUSHING LENGTH0 625 INCHES NOMINAL
ADAQBODY LENGTH2 000 INCHES NOMINAL
ADATBODY WIDTH1 515 INCHES MAXIMUM
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH1 530 INCHES NOMINAL
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH0 750 INCHES NOMINAL
AEFPNONTURN DEVICE RADIUS0 656 INCHES NOMINAL
AEFQNONTURN DEVICE LENGTH0 130 INCHES NOMINAL
AEFSNONTURN DEVICE DIAMETER0 151 INCHES MINIMUM AND 0 161 INCHES MAXIMUM
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE2 232 INCHES MAXIMUM
AKPXPOLE QUANTITY2
APNQARC QUENCHING METHODMAGNETIC BLOWOUT
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 THREADED BUSHING WPANEL SEAL
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
BBRJSPECIAL HANDLING FEATUREMAGNETIC
CMLPTHREAD QUANTITY PER INCH32
CPLMMAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE30 0 AMPERES AC ALL LOCATIONS
CPRFOPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS250 0 AC ALL LOCATIONS
CPRGMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS1000 0 AC ALL LOCATIONS
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
CPRJTRIP RELEASE METHODMAGNETIC-HYDRAULIC ALL LOCATIONS
CPRLTRIP RELEASE CHARACTERISTICTIME DELAY ALL LOCATIONS
CPRNULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT115 0 ALL LOCATIONS
CPRQRESET METHODMANUAL
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
CPRTMANUAL ACTUATOR TYPE AND QUANTITY1 TOGGLE
CPRWACTUATOR FUNCTIONTRIP-RESET
CPRXACTUATOR POSITION DESIGNATIONAT POLE TWO
CPSMINTERNAL TRIP RELEASE CONFIGURATIONSERIES TRIP ALL LOCATIONS
CQJXNOMINAL THREAD SIZE0 500 INCHES
CQWNTRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT2 000 MINIMUM AT 200 PCT AND 20 000 MAXIMUM AT 200 PCT ALL LOCATIONS
CQXFINCLOSURE PROTECTION TYPE FOR WHICH DESIGNEDHERMETICALLY SEALED AND SHOCK RESISTANT AND VIBRATION RESISTANT
CTJSUNPACKAGED UNIT WEIGHT6 000 OUNCES NOMINAL
FREQFREQUENCY IN HERTZ50 0 OR 60 0 ALL LOCATIONS
THSDTHREAD SERIES DESIGNATORUN
TTQYTERMINAL TYPE AND QUANTITY4 TAB WSCREW

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536200040 (NAICS 335313) Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77252 Automatic circuit breakers for a voltage not exceeding 1, 000 volts

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top