Quote for RF-T7210L NSN part manufactured by Automatic Connector with NSN 5935-01-274-9108

Part Number:   RF-T7210L
Alternate P/N:  RFT7210L
Manufacturer:  Automatic Connector
NSN:  5935012749108
NIIN:  012749108
CAGE Code:  94375
Item Name:  Adapter Connector
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  15091
Country:  USA
NCB Code:  01

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number RF-T7210L, which is manufactured by Automatic Connector under the CAGE Code 94375 and listed with the item name “Adapter Connector.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RF-T7210L

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number RF-T7210L is organized under NSN 5935-01-274-9108, meaning that its NIIN is 012749108. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5935 Connectors Electrical. Using these details, you can both verify that part number RF-T7210L is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number RF-T7210L with NSN 5935-01-274-9108, 5935012749108

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-274-9108

Item Description:

Adapterconnector

59350127491080PA5935009318477
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
M5533935-0000131CA

Characteristics Data of NSN 5935-01-274-9108, 5935012749108

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A AND 2B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLET-SHAPE
ABHPOVERALL LENGTH1 312 INCHES MAXIMUM
ABKWOVERALL HEIGHT1 546 INCHES MAXIMUM
ABMKOVERALL WIDTH0 650 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONVIBRATION RESISTANT AND THERMAL SHOCK RESISTANT AND SHOCK RESISTANT AND CORROSION RESISTANT AND MOISTURE RESISTANT
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY3
AFQXCONTACT POSITION ARRANGEMENT STYLETNC ALL MATING ENDS
AFQZCONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500 0 ALL MATING ENDS SINGLE CONTACT GROUPING
AFRFCONTACT MAXIMUM FREQUENCY RATING11000 0 MEGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL AND INTERNALLY THREADED COUPLING RING
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50 0 ALL MATING ENDS SINGLE CONTACT GROUPING
AKMGNOMINAL THREAD LENGTH0 187 INCHES
CMLPTHREAD QUANTITY PER INCH28
CQJXNOMINAL THREAD SIZE0 438 INCHES
CQTZCONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204TY IICL 1GRADE C MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CXCGINCLUDED CONTACT QUANTITY1 1ST MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL PIN 3RD MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0 015 GOLD GRAINS TROY
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT81349-MIL-A-55339 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS BROCHURESETC THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS INDUSTRY DIRECTORIES AND SIMILAR TRADE PUBLICATIONS REFLECTI
THSDTHREAD SERIES DESIGNATORUNEF
ZZZKSPECIFICATIONSTANDARD DATA81349-MIL-A-5533935 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top