Quote for PVR11-K553 NSN part manufactured by Bowmar Tic Inc with NSN 5905-00-622-1527

Part Number:   PVR11-K553
Alternate P/N:  PVR11K553
Manufacturer:  Bowmar Tic Inc
NSN:  5905006221527
NIIN:  006221527
CAGE Code:  99957
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37407
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number PVR11-K553, which is manufactured by Bowmar Tic Inc under the CAGE Code 99957 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PVR11-K553

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number PVR11-K553 is organized under NSN 5905-00-622-1527, meaning that its NIIN is 006221527. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number PVR11-K553 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number PVR11-K553 with NSN 5905-00-622-1527, 5905006221527

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-622-1527

Item Description:

Resistorvariablenonwire Wound

59050062215270NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
Pvr11-K553295

Characteristics Data of NSN 5905-00-622-1527, 5905006221527

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH3 046 INCHES MAXIMUM
ABNBFIRST FLAT LENGTH0 487 INCHES NOMINAL
ABNCFLAT HEIGHT0 220 INCHES NOMINAL
ABPMBODY DIAMETER2 000 INCHES MAXIMUM
ABWVSHAFT DIAMETER0 250 INCHES NOMINAL
ABXFSHAFT LENGTH1 036 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0 469 INCHES NOMINAL
ADAQBODY LENGTH2 000 INCHES MAXIMUM
ADAVOVERALL DIAMETER2 000 INCHES MAXIMUM
AEDXSHAFT STYLEROUND FLATTED
AEDZSHAFT BEARING TYPESLEEVE
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS28 0
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION300 0 NOMINAL
AEFKMAXIMUM STARTING TORQUE8 00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE8 00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE160 00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 6 OCLOCK
AEFPNONTURN DEVICE RADIUS0 437 INCHES NOMINAL
AEGHSWITCH OPERATING POSITIONEND OF ROTATION
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE SINGLE THROW NORMALLY OPEN BOTH POSITIONS MAINTAINED
AJYNSCREW THREAD DIAMETER0 375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32 0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDPANEL SEAL AND SHAFT SEAL AND SWITCH
CQCCELECTRICAL RESISTANCE PER SECTION10 0 KILOHMS 1ST SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG305 0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0 10 TO 0 10 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105 0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100 0 TO 100 0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1 0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-2 0 TO 2 0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS EQUATION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70 0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS4 000 DC
TESTTEST DATA DOCUMENT06481-914105 DRAWING THIS IS THE BASIC GOVERNING DRAWING SUCH AS A CONTRACTOR DRAWING ORIGINAL EQUIPMENT MANUFACTURER DRAWING ETC EXCLUDES ANY SPECIFICATION STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY8 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top