Quote for RP252U NSN part manufactured by Clarostat Sensors And Controls with NSN 5905-00-740-8030

Part Number:   RP252U
Alternate P/N:  RP252U
NSN:  5905007408030
NIIN:  007408030
CAGE Code:  12697
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37405
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number RP252U, which is manufactured by Clarostat Sensors And Controls under the CAGE Code 12697 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RP252U

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number RP252U is organized under NSN 5905-00-740-8030, meaning that its NIIN is 007408030. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number RP252U is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number RP252U with NSN 5905-00-740-8030, 5905007408030

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-740-8030

Item Description:

Resistorvariablenonwire Wound

59050074080300NB5905003206959
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
044-285595

Characteristics Data of NSN 5905-00-740-8030, 5905007408030

MRCCriteriaCharacteristic
ABTBMOUNTING HOLE DIAMETER0 093 INCHES NOMINAL
ABXFSHAFT LENGTH0 062 INCHES NOMINAL
ADATBODY WIDTH0 281 INCHES MAXIMUM
ADAUBODY HEIGHT0 375 INCHES MAXIMUM
AEFDACTUATOR TYPESINGLE SHAFT
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1 000 INCHES NOMINAL
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
AXGYMOUNTING METHODTERMINAL AND UNTHREADED HOLE
CQCCELECTRICAL RESISTANCE PER SECTION2 500 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000 0 NOMINAL
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0 300 INCHES NOMINAL
CQDBRESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT0 0 TO 5 5-55 DEG CELSIUS SINGLE SECTION AND 0 0 TO 3 0-25 DEG CELSIUS SINGLE SECTION AND 0 0 TO 1 5 0 DEG CELSIUS SINGLE SECTION AND-2 0 TO 2 0 85 DEG CELSIUS SINGLE SECTION AND 0 0 TO 4 5 120 DEG CELSIUS SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120 0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0 25 FREE AIR SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR WMOUNTING HOLESSLOTS
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0 568 INCHES MINIMUM AND 0 625 INCHES MAXIMUM
ABKWOVERALL HEIGHT0 968 INCHES MAXIMUM
ABWVSHAFT DIAMETER0 125 INCHES NOMINAL
ADAQBODY LENGTH1 304 INCHES MAXIMUM
AEDXSHAFT STYLEROUND SLOTTED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION9000 0 NOMINAL
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0 700 INCHES NOMINAL
AFJNFRAGILITY FACTORMODERATELY DELICATE
AKPVMOUNTING FACILITY QUANTITY2
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0 100 INCHES NOMINAL
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10 0 TO 10 0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70 0 SINGLE SECTION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top