Quote for 382-2003M 0.531 IN. SHAFT NSN part manufactured by Clarostat Sensors And Controls with NSN 5905-01-199-1090

Part Number:   382-2003M 0.531 IN. SHAFT
Alternate P/N:  3822003M 0.531 IN. SHAFT
NSN:  5905011991090
NIIN:  011991090
CAGE Code:  12697
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37405
Country:  USA
NCB Code:  01

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number 382-2003M 0.531 IN. SHAFT, which is manufactured by Clarostat Sensors And Controls under the CAGE Code 12697 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 382-2003M 0.531 IN. SHAFT

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number 382-2003M 0.531 IN. SHAFT is organized under NSN 5905-01-199-1090, meaning that its NIIN is 011991090. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number 382-2003M 0.531 IN. SHAFT is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number 382-2003M 0.531 IN. SHAFT with NSN 5905-01-199-1090, 5905011991090

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-199-1090

Item Description:

Resistorvariablenonwire Wound

59050119910900NB5905000930961
CIICHCCESDPMICCriticalityENAC
UBA0
Part NumberISCRNVCRNCCHCCMSDSSADC
Wa2g034s204ma38E

Characteristics Data of NSN 5905-01-199-1090, 5905011991090

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1 219 INCHES MAXIMUM
ABPMBODY DIAMETER0 500 INCHES NOMINAL
ABWVSHAFT DIAMETER0 125 INCHES NOMINAL
ABXFSHAFT LENGTH0 500 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0 250 INCHES NOMINAL
ADAQBODY LENGTH0 453 INCHES NOMINAL
ADAVOVERALL DIAMETER0 500 INCHES NOMINAL
AEDXSHAFT STYLEROUND SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION292 0 MINIMUM AND 298 0 MAXIMUM
AEFNNONTURN DEVICE LOCATIONAT 430 OCLOCK AND AT 1030 OCLOCK
AEFPNONTURN DEVICE RADIUS0 245 INCHES NOMINAL
AJYNSCREW THREAD DIAMETER0 250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32 0
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODSTANDARD BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION200 000 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG292 0 MINIMUM AND 298 0 MAXIMUM
CQDBRESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT-3 0 TO 0 0-55 DEG CELSIUS SINGLE SECTION AND-5 0 TO 10 0-25 DEG CELSIUS SINGLE SECTION AND-5 0 TO 10 0 25 DEG CELSIUS SINGLE SECTION AND 0 0 TO 3 0 120 DEG CELSIUS SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120 0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0 5 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10 0 TO 10 0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70 0 SINGLE SECTION
TESTTEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS BROCHURESETC THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS INDUSTRY DIRECTORIES AND SIMILAR TRADE PUBLICATIONS REFLECTING
TTQYTERMINAL TYPE AND QUANTITY3 TAB SOLDER LUG
ZZZKSPECIFICATIONSTANDARD DATA81349-MIL-R-943 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top