Quote for CM45838-1 NSN part manufactured by Clarostat Sensors And Controls with NSN 5905-01-342-0716

Part Number:   CM45838-1
Alternate P/N:  CM458381
NSN:  5905013420716
NIIN:  013420716
CAGE Code:  12697
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37405
Country:  USA
NCB Code:  01

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number CM45838-1, which is manufactured by Clarostat Sensors And Controls under the CAGE Code 12697 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CM45838-1

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number CM45838-1 is organized under NSN 5905-01-342-0716, meaning that its NIIN is 013420716. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number CM45838-1 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number CM45838-1 with NSN 5905-01-342-0716, 5905013420716

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-342-0716

Item Description:

Resistorvariablenonwire Wound

59050134207160N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
Cm45838-1525

Characteristics Data of NSN 5905-01-342-0716, 5905013420716

MRCCriteriaCharacteristic
ADATBODY WIDTH0 475 INCHES MINIMUM AND 0 525 INCHES MAXIMUM
AEFDACTUATOR TYPESINGLE SHAFT
AEFLMAXIMUM RUNNING TORQUE3 00 INCH-OUNCES
AJYPSCREW THREAD SERIES DESIGNATORUNEF
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0 100 INCHES NOMINAL
AARGRELIABILITY INDICATORNOT ESTABLISHED
ADAUBODY HEIGHT0 535 INCHES MINIMUM AND 0 565 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFKMAXIMUM STARTING TORQUE3 00 INCH-OUNCES
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGAVEND ITEM IDENTIFICATION5895-01-233-2919 COMMUNICATION SYSTEM
AJYNSCREW THREAD DIAMETER0 250 INCHES NOMINAL
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290 0 MINIMUM AND 300 0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150 0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 PIN
APXHTERMINAL LOCATIONREAR-BOTTOM
CQCCELECTRICAL RESISTANCE PER SECTION10 0 KILOHMS SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85 0 SINGLE SECTION
AAPNSECTION QUANTITY1
ABWVSHAFT DIAMETER0 124 INCHES MINIMUM AND 0 126 INCHES MAXIMUM
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION290 0 MINIMUM AND 300 0 MAXIMUM
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0 200 INCHES NOMINAL
AJYQSCREW THREAD QUANTITY PER INCH32 0
AXGYMOUNTING METHODSTANDARD BUSHING
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0 5 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10 0 TO 10 0 SINGLE SECTION
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
ABJTTERMINAL LENGTH0 210 INCHES MINIMUM
ABXFSHAFT LENGTH0 969 INCHES MINIMUM AND 1 031 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0 234 INCHES MINIMUM AND 0 266 INCHES MAXIMUM
ADAQBODY LENGTH0 484 INCHES NOMINAL
AEDZSHAFT BEARING TYPESLEEVE

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top