Quote for XP-09-RP002 REV A ITEM NO.7 NSN part manufactured by Reliability And Performance with NSN 5935-01-603-9170

Part Number:   XP-09-RP002 REV A ITEM NO.7
Alternate P/N:  XP09RP002 REV A ITEM NO.7
Manufacturer:  Reliability And Performance
NSN:  5935016039170
NIIN:  016039170
CAGE Code:  3G9B1
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  15093
Country:  USA
NCB Code:  01

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number XP-09-RP002 REV A ITEM NO.7, which is manufactured by Reliability And Performance under the CAGE Code 3G9B1 and listed with the item name “Connector Receptacle Electrical.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for XP-09-RP002 REV A ITEM NO.7

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number XP-09-RP002 REV A ITEM NO.7 is organized under NSN 5935-01-603-9170, meaning that its NIIN is 016039170. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5935 Connectors Electrical. Using these details, you can both verify that part number XP-09-RP002 REV A ITEM NO.7 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number XP-09-RP002 REV A ITEM NO.7 with NSN 5935-01-603-9170, 5935016039170

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-603-9170

Item Description:

Connectorreceptacleelectrical

59350160391700PA
CIICHCCESDPMICCriticalityENAC
UAG0
Part NumberISCRNVCRNCCHCCMSDSSADC
Xp-09-Rp002 Rev A Item No 751CH

Characteristics Data of NSN 5935-01-603-9170, 5935016039170

MRCCriteriaCharacteristic
FEATSpecial FeaturesCONTACTS PER M39029/58-364
AEBWCenter To Center Distance Between Mounting Facilities Parallel To Height29.4 MILLIMETERS MINIMUM AND 31.8 MILLIMETERS MAXIMUM
CSWMShell Surface TreatmentCADMIUM AND NICKEL
AFQRThreaded Device TypeBACK SHELL AND COUPLING FACILITY
AFRTShell TypeSOLID
THSDThread Series DesignatorISO M AND SPECIAL ACME
AAJDThread Class2A AND 2A
CSPTShell MaterialALUMINUM
PRMTPrecious MaterialGOLD
CTTCThread Tolerance Class6G EXTERNAL
AFRVConnector Locking MethodEXTERNALLY THREADED SHELL
ABMKOverall Width39.7 MILLIMETERS NOMINAL
AFQKDistance From Mounting Shoulder To Front Face20.1 MILLIMETERS NOMINAL
AAQLBody StyleSTRAIGHT SHAPE, EXTERNAL COUPLING
AWTNOperating Temp Rating-65.0 DEG CELSIUS MINIMUM AND 175.0 DEG CELSIUS MAXIMUM
AEHADistance Between Centerlines Of Mounting Facilities Parallel To Body Width29.4 MILLIMETERS MINIMUM AND 31.8 MILLIMETERS MAXIMUM
ABHPOverall Length33.7 MILLIMETERS MAXIMUM
CXCGIncluded Contact Quantity16 SINGLE MATING END SINGLE CONTACT GROUPING
TESTTest Data Document81349-MIL-DTL-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AFQWMating End Quantity1
CQTMTerminal LocationBACK SINGLE MATING END SINGLE CONTACT GROUPING
AAJFThread DirectionRIGHT-HAND AND RIGHT-HAND
ZZZKSpecification/Standard Data81349-MIL-DTL-38999/20 GOVERNMENT SPECIFICATION
AFRNPolarization MethodKEYWAY OR MULTIPLE KEYWAY
AFQZContact RemovabilityREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
ABKWOverall Height39.7 MILLIMETERS NOMINAL
CSCFTerminal TypeCRIMP SINGLE MATING END SINGLE CONTACT GROUPING
MRCDecoded RequirementClear Text Reply
AFRPInsert Position In Deg103.0 AND 160.0 AND 220.0 AND 294.0
CXCLIncluded Contact TypeROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
AFQXContact Position Arrangement Style21-16 SINGLE MATING END
PMLCPrecious Material And LocationCONTACT SURFACE GOLD
CQJXNominal Thread Size31.0 MILLIMETERS AND 1.375 INCHES
AGAVEnd Item IdentificationTRANSFER PANE

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top