Quote for 18M824 NSN part manufactured by Rockwell Automation Ltd with NSN 5905-01-020-2431

Part Number:   18M824
Alternate P/N:  18M824
Manufacturer:  Rockwell Automation Ltd
NSN:  5905010202431
NIIN:  010202431
CAGE Code:  01121
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37405
Country:  USA
NCB Code:  01

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number 18M824, which is manufactured by Rockwell Automation Ltd under the CAGE Code 01121 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 18M824

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number 18M824 is organized under NSN 5905-01-020-2431, meaning that its NIIN is 010202431. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number 18M824 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number 18M824 with NSN 5905-01-020-2431, 5905010202431

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-020-2431

Item Description:

Resistorvariablenonwire Wound

5905010202431 NB
CIICHCCESDPMICCriticalityENAC
BU
Part NumberISCRNVCRNCCHCCMSDSSADC
18m824295

Characteristics Data of NSN 5905-01-020-2431, 5905010202431

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH2 430 INCHES MAXIMUM
ABKWOVERALL HEIGHT1 031 INCHES NOMINAL
ABMKOVERALL WIDTH0 625 INCHES NOMINAL
ABWVSHAFT DIAMETER0 125 INCHES NOMINAL
ABXFSHAFT LENGTH0 926 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0 250 INCHES NOMINAL
ADAQBODY LENGTH1 375 INCHES MINIMUM AND 1 469 INCHES MAXIMUM
ADATBODY WIDTH0 625 INCHES NOMINAL
ADAUBODY HEIGHT0 625 INCHES NOMINAL
AEDQUNDERCUT DIAMETER0 078 INCHES NOMINAL
AEDXSHAFT STYLEROUND STEPPED
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS125 0
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION260 0 NOMINAL
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
AEFPNONTURN DEVICE RADIUS0 312 INCHES NOMINAL
AEGHSWITCH OPERATING POSITIONSTART OF ROTATION
AEGJSWITCH CONTACT ARRANGEMENTDOUBLE POLE SINGLE THROW NORMALLY OPEN
AGQLUNDERCUT LENGTH0 301 INCHES NOMINAL
AJYNSCREW THREAD DIAMETER0 250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32 0
APXHTERMINAL LOCATIONREAR-BOTTOM
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDSWITCH
CQCCELECTRICAL RESISTANCE PER SECTION5 0 KILOHMS ALL SECTIONS
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG300 0 NOMINAL
CQDBRESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT-5 5 TO 5 5-55 DEG CELSIUS ALL SECTIONS AND-3 0 TO 3 0-25 DEG CELSIUS ALL SECTIONS AND-3 0 TO 3 0 85 DEG CELSIUS ALL SECTIONS AND-5 0 TO 5 0 120 DEG CELSIUS ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120 0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0 5 FREE AIR ALL SECTIONS
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20 0 TO 20 0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70 0 ALL SECTIONS
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS2 000 AC
TTQYTERMINAL TYPE AND QUANTITY10 TAB SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL Q22tex-
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top