Quote for MD19-10-10-2411 NSN part manufactured by Sensor Systems Inc with NSN 5905-00-043-0629

Part Number:   MD19-10-10-2411
Alternate P/N:  MD1910102411
Manufacturer:  Sensor Systems Inc
NSN:  5905000430629
NIIN:  000430629
CAGE Code:  04454
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37406
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number MD19-10-10-2411, which is manufactured by Sensor Systems Inc under the CAGE Code 04454 and listed with the item name “Resistor Variable Wire Wound Non.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MD19-10-10-2411

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number MD19-10-10-2411 is organized under NSN 5905-00-043-0629, meaning that its NIIN is 000430629. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number MD19-10-10-2411 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number MD19-10-10-2411 with NSN 5905-00-043-0629, 5905000430629

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-043-0629

Item Description:

Resistorvariablewire Woundnon

59050004306290NA
CIICHCCESDPMICCriticalityENAC
UAP
Part NumberISCRNVCRNCCHCCMSDSSADC
Ms19-10-10-2411C25

Characteristics Data of NSN 5905-00-043-0629, 5905000430629

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1 56200 INCHES MAXIMUM
AAVMPILOT LENGTH0 06200 INCHES NOMINAL
ABHPOVERALL LENGTH2 206 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER1 625 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0 07800 INCHES MINIMUM
ABPMBODY DIAMETER1 830 INCHES MAXIMUM
ABWVSHAFT DIAMETER0 1248 INCHES MAXIMUM
ABXFSHAFT LENGTH0 500 INCHES NOMINAL
ADAQBODY LENGTH1 690 INCHES MAXIMUM
ADAVOVERALL DIAMETER2 005 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1 81200 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0 06200 INCHES NOMINAL
AEDXSHAFT STYLEROUND SLOTTED
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600 0 NOMINAL
AEFKMAXIMUM STARTING TORQUE2 30 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE1 80 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE240 00 INCH-OUNCES
AEFYSHAFT END PLAY0 00200 INCHES
AEFZSHAFT RUNOUT0 0005 INCHES
AEGALATERAL RUNOUT0 0005 INCHES
AEGBPILOT DIAMETER RUNOUT0 00100 INCHES
AEGCSHAFT RADIAL PLAY0 0005 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION10 000 KILOHMS 1ST SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3780 0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0 035 TO 0 035 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER130 0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2 0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRJSFIXED TAP QUANTITY PER SECTION1 1ST SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5 0 TO 5 0 1ST SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-25 0 TO 25 0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40 0 SINGLE SECTION
PMWTPRECIOUS MATERIAL AND WEIGHT0 002 PALLADIUM OUNCES TROY AND 0 001 GOLD OUNCES TROY AND 0 056 SILVER OUNCES TROY
PRMTPRECIOUS MATERIALPALLADIUM AND GOLD AND SILVER
TESTTEST DATA DOCUMENT06481-900217-238 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS BROCHURESETC THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS INDUSTRY DIRECTORIES AND SIMILAR TRADE PUBLICATIONS REFLECTIN
TTQYTERMINAL TYPE AND QUANTITY8 SOLDER STUD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC P - Item contains platinum family metals.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9nt-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: Z - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 723 - Radio parts and equipment, excluding tubes packed separately
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top