Quote for A091 NSN part manufactured by Sensor Systems Inc with NSN 5905-00-056-4295

Part Number:   A091
Alternate P/N:  A091
Manufacturer:  Sensor Systems Inc
NSN:  5905000564295
NIIN:  000564295
CAGE Code:  04454
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37407
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number A091, which is manufactured by Sensor Systems Inc under the CAGE Code 04454 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for A091

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number A091 is organized under NSN 5905-00-056-4295, meaning that its NIIN is 000564295. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number A091 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number A091 with NSN 5905-00-056-4295, 5905000564295

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-056-4295

Item Description:

Resistorvariablenonwire Wound

59050005642950NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
116fts259625

Characteristics Data of NSN 5905-00-056-4295, 5905000564295

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY11
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0 9688 INCHES NOMINAL
AAVMPILOT LENGTH0 6200 INCHES NOMINAL
ABNBFIRST FLAT LENGTH0 375 INCHES NOMINAL
ABNCFLAT HEIGHT0 105 INCHES NOMINAL
ABPAUNDERCUT DIAMETER0 968 INCHES NOMINAL
ABPCUNDERCUT WIDTH0 0570 INCHES MINIMUM
ABPMBODY DIAMETER1 062 INCHES NOMINAL
ABWVSHAFT DIAMETER0 1247 INCHES NOMINAL
ABXFSHAFT LENGTH0 437 INCHES NOMINAL
ADAQBODY LENGTH2 680 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER1 0750 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0 0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND FLATTED
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION340 0 NOMINAL
AEFKMAXIMUM STARTING TORQUE3 45 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE3 45 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE32 00 INCH-OUNCES
AEFYSHAFT END PLAY0 005 INCHES
AEFZSHAFT RUNOUT0 002 INCHES
AEGALATERAL RUNOUT0 001 INCHES
AEGBPILOT DIAMETER RUNOUT0 001 INCHES
AEGCSHAFT RADIAL PLAY0 001 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION10 0 PERCENT RATED AMPERES C AND BETTER FINISH
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION156 36 5TH SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360 0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0 25 TO 0 25 1ST SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER100 0 ALL SECTIONS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400 0400 0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1 0 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRJSFIXED TAP QUANTITY PER SECTION1 5TH SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-2 0 TO 2 0 DEG ANGULAR ROTATION ALL SECTIONS
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10 010 0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS EQUATION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25 0 ALL SECTIONS
TESTTEST DATA DOCUMENT97942-577R900 DRAWING THIS IS THE BASIC GOVERNING DRAWING SUCH AS A CONTRACTOR DRAWING ORIGINAL EQUIPMENT MANUFACTURER DRAWING ETC EXCLUDES ANY SPECIFICATION STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQYTERMINAL TYPE AND QUANTITY45 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-v
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 657 - Instruments, electric meter

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top