Quote for D10-09-277 NSN part manufactured by Sensor Systems Inc with NSN 5905-00-483-0178

Part Number:   D10-09-277
Alternate P/N:  D1009277
Manufacturer:  Sensor Systems Inc
NSN:  5905004830178
NIIN:  004830178
CAGE Code:  04454
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37408
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number D10-09-277, which is manufactured by Sensor Systems Inc under the CAGE Code 04454 and listed with the item name “Resistor Variable Wire Wound Pre.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D10-09-277

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number D10-09-277 is organized under NSN 5905-00-483-0178, meaning that its NIIN is 004830178. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number D10-09-277 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number D10-09-277 with NSN 5905-00-483-0178, 5905004830178

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-483-0178

Item Description:

Resistorvariablewire Woundpre

59050048301780N 5905004200412
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
629893-1223

Characteristics Data of NSN 5905-00-483-0178, 5905004830178

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0 7500 INCHES NOMINAL
AAVMPILOT LENGTH0 0620 INCHES NOMINAL
ABHPOVERALL LENGTH3 205 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER0 781 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0 0570 INCHES MINIMUM
ABPMBODY DIAMETER0 880 INCHES MAXIMUM
ABWVSHAFT DIAMETER0 1247 INCHES NOMINAL
ABXFSHAFT LENGTH0 655 INCHES MAXIMUM
ADAQBODY LENGTH2 550 INCHES MAXIMUM
ADAVOVERALL DIAMETER1 065 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER0 8750 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0 0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND SLOTTED
AEDZSHAFT BEARING TYPEBALL
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS30 0
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3300 0 NOMINAL
AEFKMAXIMUM STARTING TORQUE1 50 INCH-OUNCES
AEFYSHAFT END PLAY0 005 INCHES
AEFZSHAFT RUNOUT0 001 INCHES
AEGALATERAL RUNOUT0 003 INCHES
AEGCSHAFT RADIAL PLAY0 002 INCHES
AEGHSWITCH OPERATING POSITIONSTART OF LINEAR MOVEMENT
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE SINGLE THROW NORMALLY OPEN BOTH POSITIONS MAINTAINED
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDSWITCH
CQCCELECTRICAL RESISTANCE PER SECTION2 0 KILOHMS 1ST SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3408 0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0 04 TO 0 04 1ST SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125 0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1 0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION ABSOLUTE LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5 0 TO 5 0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20 0 TO 20 0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70 0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS0 800 DC
TESTTEST DATA DOCUMENT07217-629893 DRAWING THIS IS THE BASIC GOVERNING DRAWING SUCH AS A CONTRACTOR DRAWING ORIGINAL EQUIPMENT MANUFACTURER DRAWING ETC EXCLUDES ANY SPECIFICATION STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY9 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top