Quote for 205-1 NSN part manufactured by Sensor Systems Inc with NSN 5905-00-863-5590

Part Number:   205-1
Alternate P/N:  2051
Manufacturer:  Sensor Systems Inc
NSN:  5905008635590
NIIN:  008635590
CAGE Code:  04454
FSG:  59 Electrical and Electronic Equipment Components
INC Code:  37407
Country:  USA
NCB Code:  00

Whether one requires military and defense parts, aerospace parts, or other such items, there is no better purchasing platform than Jet Parts 360, an ASAP Semiconductor website. You have taken interest in part number 205-1, which is manufactured by Sensor Systems Inc under the CAGE Code 04454 and listed with the item name “Resistor Variable Nonwire Wound.” If you would like to receive procurement options for this listing, please fill out and submit the form on this page with as much information as you can regarding your needs. Our staff will then use details like your desired quantity and target pricing to formulate a customized solution that caters to you.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 205-1

Contact Information

“*” Required Fields Are Compulsory
 * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

You can mail your Bill of Materials (BOM) to sales@jetparts360.com. Please do not hesitate to contact us if you have any additional questions. With over 50,000 manufacturers and 20 million unique part numbers we are a one stop shop for all aerospace and aviation requirements. Feel free to browse our website, JetParts360.com for any additional parts that you might require or download the ASAP Semiconductor App on the Google Play store. We are available 24/7 at +1-714-705-4780.

To ensure that customers easily locate the various military jet parts, NSN items, and aerospace parts their operations demand, we list all offerings with as much relevant information as we can. For example, part number 205-1 is organized under NSN 5905-00-863-5590, meaning that its NIIN is 008635590. Furthermore, the first four digits of the NSN indicate that the item belongs to FSC 5905 Resistors. Using these details, you can both verify that part number 205-1 is the exact item you require and seamlessly search for related options as needed. With all that we do to simplify procurement for our customers, be sure to choose us for all your operational requirements.

NSN Information for Part Number 205-1 with NSN 5905-00-863-5590, 5905008635590

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-863-5590

Item Description:

Resistorvariablenonwire Wound

59050086355900NA
CIICHCCESDPMICCriticalityENAC
UAU
Part NumberISCRNVCRNCCHCCMSDSSADC
754psc695

Characteristics Data of NSN 5905-00-863-5590, 5905008635590

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPAUNDERCUT DIAMETER1 870 INCHES NOMINAL
ABXFSHAFT LENGTH0 750 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER2 0050 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE1 00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE1 00 INCH-OUNCES
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360 0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150 0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400 0400 0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS4 0 FREE AIR SINGLE SECTION
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-20 00 0 OHMS SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION GRAPH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25 0 SINGLE SECTION
FEATSPECIAL FEATURES0 033 IN DIA THROUGH HOLE 0 156 IN FROM SHAFT END
TTQYTERMINAL TYPE AND QUANTITY4 TURRET
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AAVLPILOT DIAMETER1 8750 INCHES MAXIMUM
AAVMPILOT LENGTH0 0670 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0 0550 INCHES MINIMUM
ABPMBODY DIAMETER2 005 INCHES MAXIMUM
ABWVSHAFT DIAMETER0 250 INCHES MAXIMUM
ADAQBODY LENGTH1 050 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0 0550 INCHES MINIMUM
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION180 0 MINIMUM
AEFZSHAFT RUNOUT0 001 INCHES
AEGALATERAL RUNOUT0 002 INCHES
AEGBPILOT DIAMETER RUNOUT0 001 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION500 0 OHMS SINGLE SECTION
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0 500 50 SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION ABSOLUTE CONFORMITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20 00 0 SINGLE SECTION
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS250 0 SINGLE SECTION
TESTTEST DATA DOCUMENT19200-1054539 DRAWING THIS IS THE BASIC GOVERNING DRAWING SUCH AS A CONTRACTOR DRAWING ORIGINAL EQUIPMENT MANUFACTURER DRAWING ETC EXCLUDES ANY SPECIFICATION STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting!

We Hope You'll Choose Us to Fulfill Your AOG Needs In the Future. We’Re Always Ready to Serve, 24/7, 365 Days A Year.

Request for Quote

We use cookies to ensure that we give you the great experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top